home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
EnigmA Amiga Run 1995 November
/
EnigmA AMIGA RUN 02 (1995)(G.R. Edizioni)(IT)[!][issue 1995-11][Skylink CD].iso
/
earcd
/
program
/
gcc
/
ixemul41.lha
/
ixemul-41.3
/
include
/
machine
/
vmparam.h
< prev
Wrap
C/C++ Source or Header
|
1994-02-23
|
9KB
|
254 lines
/*
* Copyright (c) 1988 University of Utah.
* Copyright (c) 1982, 1986, 1990 The Regents of the University of California.
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* the Systems Programming Group of the University of Utah Computer
* Science Department.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: Utah $Hdr: vmparam.h 1.16 91/01/18$
*
* @(#)vmparam.h 7.3 (Berkeley) 5/7/91
*/
/*
* Machine dependent constants for HP300
*/
/*
* USRTEXT is the start of the user text/data space, while USRSTACK
* is the top (end) of the user stack. LOWPAGES and HIGHPAGES are
* the number of pages from the beginning of the P0 region to the
* beginning of the text and from the beginning of the P1 region to the
* beginning of the stack respectively.
*
* NOTE: the ONLY reason that HIGHPAGES is 0x100 instead of UPAGES (3)
* is for HPUX compatibility. Why?? Because HPUX's debuggers
* have the user's stack hard-wired at FFF00000 for post-mortems,
* and we must be compatible...
*/
#define USRTEXT 0
#define USRSTACK (-HIGHPAGES*NBPG) /* Start of user stack */
#define BTOPUSRSTACK (0x100000-HIGHPAGES) /* btop(USRSTACK) */
#define P1PAGES 0x100000
#define LOWPAGES 0
#define HIGHPAGES (0x100000/NBPG)
/*
* Virtual memory related constants, all in bytes
*/
#ifndef MAXTSIZ
#define MAXTSIZ (6*1024*1024) /* max text size */
#endif
#ifndef DFLDSIZ
#define DFLDSIZ (8*1024*1024) /* initial data size limit */
#endif
#ifndef MAXDSIZ
#define MAXDSIZ (16*1024*1024) /* max data size */
#endif
#ifndef DFLSSIZ
#define DFLSSIZ (512*1024) /* initial stack size limit */
#endif
#ifndef MAXSSIZ
#define MAXSSIZ MAXDSIZ /* max stack size */
#endif
/*
* Default sizes of swap allocation chunks (see dmap.h).
* The actual values may be changed in vminit() based on MAXDSIZ.
* With MAXDSIZ of 16Mb and NDMAP of 38, dmmax will be 1024.
* DMMIN should be at least ctod(1) so that vtod() works.
* vminit() insures this.
*/
#define DMMIN 32 /* smallest swap allocation */
#define DMMAX 4096 /* largest potential swap allocation */
/*
* Sizes of the system and user portions of the system page table.
*/
/* SYSPTSIZE IS SILLY; IT SHOULD BE COMPUTED AT BOOT TIME */
#define SYSPTSIZE (2 * NPTEPG) /* 8mb */
#define USRPTSIZE (1 * NPTEPG) /* 4mb */
/*
* PTEs for mapping user space into the kernel for phyio operations.
* One page is enough to handle 4Mb of simultaneous raw IO operations.
*/
#ifndef USRIOSIZE
#define USRIOSIZE (1 * NPTEPG) /* 4mb */
#endif
/*
* PTEs for system V style shared memory.
* This is basically slop for kmempt which we actually allocate (malloc) from.
*/
#ifndef SHMMAXPGS
#define SHMMAXPGS 1024 /* 4mb */
#endif
/*
* External IO space map size.
* By default we make it large enough to map up to 3 DIO-II devices and
* the complete DIO space. For a 320-only configuration (which has no
* DIO-II) you could define a considerably smaller region.
*/
#ifndef EIOMAPSIZE
#define EIOMAPSIZE 3584 /* 14mb */
#endif
/*
* Boundary at which to place first MAPMEM segment if not explicitly
* specified. Should be a power of two. This allows some slop for
* the data segment to grow underneath the first mapped segment.
*/
#define MMSEG 0x200000
/*
* The size of the clock loop.
*/
#define LOOPPAGES (maxfree - firstfree)
/*
* The time for a process to be blocked before being very swappable.
* This is a number of seconds which the system takes as being a non-trivial
* amount of real time. You probably shouldn't change this;
* it is used in subtle ways (fractions and multiples of it are, that is, like
* half of a ``long time'', almost a long time, etc.)
* It is related to human patience and other factors which don't really
* change over time.
*/
#define MAXSLP 20
/*
* A swapped in process is given a small amount of core without being bothered
* by the page replacement algorithm. Basically this says that if you are
* swapped in you deserve some resources. We protect the last SAFERSS
* pages against paging and will just swap you out rather than paging you.
* Note that each process has at least UPAGES+CLSIZE pages which are not
* paged anyways (this is currently 8+2=10 pages or 5k bytes), so this
* number just means a swapped in process is given around 25k bytes.
* Just for fun: current memory prices are 4600$ a megabyte on VAX (4/22/81),
* so we loan each swapped in process memory worth 100$, or just admit
* that we don't consider it worthwhile and swap it out to disk which costs
* $30/mb or about $0.75.
*/
#define SAFERSS 4 /* nominal ``small'' resident set size
protected against replacement */
/*
* DISKRPM is used to estimate the number of paging i/o operations
* which one can expect from a single disk controller.
*/
#define DISKRPM 60
/*
* Klustering constants. Klustering is the gathering
* of pages together for pagein/pageout, while clustering
* is the treatment of hardware page size as though it were
* larger than it really is.
*
* KLMAX gives maximum cluster size in CLSIZE page (cluster-page)
* units. Note that ctod(KLMAX*CLSIZE) must be <= DMMIN in dmap.h.
* ctob(KLMAX) should also be less than MAXPHYS (in vm_swp.c)
* unless you like "big push" panics.
*/
#define KLMAX (4/CLSIZE)
#define KLSEQL (2/CLSIZE) /* in klust if vadvise(VA_SEQL) */
#define KLIN (4/CLSIZE) /* default data/stack in klust */
#define KLTXT (4/CLSIZE) /* default text in klust */
#define KLOUT (4/CLSIZE)
/*
* KLSDIST is the advance or retard of the fifo reclaim for sequential
* processes data space.
*/
#define KLSDIST 3 /* klusters advance/retard for seq. fifo */
/*
* Paging thresholds (see vm_sched.c).
* Strategy of 1/19/85:
* lotsfree is 512k bytes, but at most 1/4 of memory
* desfree is 200k bytes, but at most 1/8 of memory
* minfree is 64k bytes, but at most 1/2 of desfree
*/
#define LOTSFREE (512 * 1024)
#define LOTSFREEFRACT 4
#define DESFREE (200 * 1024)
#define DESFREEFRACT 8
#define MINFREE (64 * 1024)
#define MINFREEFRACT 2
/*
* There are two clock hands, initially separated by HANDSPREAD bytes
* (but at most all of user memory). The amount of time to reclaim
* a page once the pageout process examines it increases with this
* distance and decreases as the scan rate rises.
*/
#define HANDSPREAD (2 * 1024 * 1024)
/*
* The number of times per second to recompute the desired paging rate
* and poke the pagedaemon.
*/
#define RATETOSCHEDPAGING 4
/*
* Believed threshold (in megabytes) for which interleaved
* swapping area is desirable.
*/
#define LOTSOFMEM 2
#define mapin(pte, v, pfnum, prot) \
(*(u_int *)(pte) = ((pfnum) << PGSHIFT) | (prot), TBIS((caddr_t)(v)))
/*
* Mach derived constants
*/
/* user/kernel map constants */
#define VM_MIN_ADDRESS ((vm_offset_t)0)
#define VM_MAXUSER_ADDRESS ((vm_offset_t)0xFFF00000)
#define VM_MAX_ADDRESS ((vm_offset_t)0xFFF00000)
#define VM_MIN_KERNEL_ADDRESS ((vm_offset_t)0)
#define VM_MAX_KERNEL_ADDRESS ((vm_offset_t)0xFFFFF000)
/* virtual sizes (bytes) for various kernel submaps */
#define VM_MBUF_SIZE (NMBCLUSTERS*MCLBYTES)
#define VM_KMEM_SIZE (NKMEMCLUSTERS*CLBYTES)
#define VM_PHYS_SIZE (USRIOSIZE*CLBYTES)
/* # of kernel PT pages (initial only, can grow dynamically) */
#define VM_KERNEL_PT_PAGES ((vm_size_t)2) /* XXX: SYSPTSIZE */
/* pcb base */
#define pcbb(p) ((u_int)(p)->p_addr)